カゴの中を見る

商品数:0点

合計:0円

カゴの中を見る

商品を探す

商品カテゴリから選ぶ

商品名を入力

検索結果で出ない商品は

お問い合わせ下さいませ

商品カテゴリ

分野別

  • NEW
商品コード: SAE-AMS-S-88002-E-2019

SAE AMS-S-8802 Revision E, 2019 Edition

販売価格(税込10%): 17,254 円
種類別の販売価格、在庫状況を見る
在庫区分
数  量

カゴに入れる

商品おすすめポイント

書名

SAE AMS-S-8802 Revision E, 2019 Edition: Sealing Compound, Fuel Resistant, Integral Fuel Tanks and Fuel Cell Cavities
出版社/発行元 SAE International (SAE)
発行年/月 2019年2月   
装丁 ペーパー
ページ数/巻数 13 ページ
発送予定 海外倉庫よりお取り寄せ 1-2週間以内に発送します

  

※PDF版(シングルユーザー版)をご希望のお客様は別途お問合せ下さいませ
※当ウェブ・ショップに掲載のない規格につきましては、別途お問合せ下さいませ。
※掲載の規格は、当ウェブ・ショップに掲載時点で確認できた最新版でございます。
最新の発行状況につきましては受注時に改めて確認をさせて頂きますので予めご了承下さい。

  

 

Description

 

This specification covers fuel-resistant, two-component polysulfide synthetic rubber compounds which cure at room temperature.

Application

This sealing compound has been used typically for sealing and repairing integral fuel tanks, cabin pressure sealing, and aerodynamic smoothing, but usage is not limited to such applications. It may be used for faying surface sealing, for wetinstallation of fasteners, for overcoating fasteners, and for sealing joints and seams. The sealing compound can be used in fuel areas as well as in non-fuel areas. It may, in some cases, be used as a non-structural adhesive. The sealant is capable of continuous service use from -65 to +250 °F (-54 to 121 °C). AMS3100 adhesion promoter may be applied prior to application of the sealant.

Classification

- Types Sealing compounds covered by this specification are classified as follows:
- Type 1 - Dichromate Cured Sealant. Material with a dichromate curing agent.
- Type 2 - Manganese Dioxide Cured Sealant. Material with a manganese dioxide curing agent.
- Classes
- The following classes apply to both Type 1 and Type 2 sealing compounds:
- Class A - Suitable for application by brush. Available in the following application times in hours:
- A-1/2
- A-1
- A-2
- Class B - Suitable for application by extrusion gun or spatula. Available in the following application times in hours:
- B-1/2
- B-1
- B-2
- B-4 Class
- C - Suitable for extrusion gun, spatula, brush, or roller. Available in the following application times in hours:
- Notation: ( ) Assembly time in hours:
- C-8(20)
- C-8(48)
- C-24(80)
- Safety - Hazardous Materials
- Shall be in accordance with AS5502 (1.1).

 

 

種類別の販売価格、在庫状況を見る
在庫区分
数  量

カゴに入れる

この商品に対するお客様の声

 

 

mitsumori

見積書をお送り致します

 

 

  新刊案内など配信中!!

 

このページのTOPへ