カゴの中を見る

商品数:0点

合計:0円

カゴの中を見る

商品を探す

商品カテゴリから選ぶ

商品名を入力

検索結果で出ない商品は

お問い合わせ下さいませ

商品カテゴリ

工業規格

  • オススメ
商品コード: EJMA10th2015

EJMA BOOK OF STANDARDS, 10th Edition: 2015

販売価格(税込): 88,925 円  (本体価格: 82,338 円+税)
関連カテゴリ:

工業規格 > EJMA規格

種類別の販売価格、在庫状況を見る
在庫区分
数  量

カゴに入れる

商品おすすめポイント

書名

EJMA BOOK OF STANDARDS, 10th Edition: 2015 Standards of the Expansion Joint Manufacturers Association, Inc. - Includes one copy of Practical Guide to Expansion Joints (Includes all amendments and changes through Errata , December 2016)
出版社/発行元 The Expansion Joint Manufacturers Association, Inc.
発行年/月 2016年12月   
装丁 Softcover
発送予定 海外倉庫よりお取り寄せ 1-2週間以内に発送します

 

Description

 

EJMA Standards: The Authority on Expansion Joints
The EJMA Standards are recognized throughout the world as the authority on the proper selection and application of metallic bellows type expansion joints for safe and reliable piping and vessel installation. The Tenth Edition standards combine the knowledge and experience of the leading manufacturers of expansion joints into an invaluable reference document.

Significant Changes in the Tenth Edition:

- A new approach was developed for the design of reinforced bellows, resulting in a modified set of equations for some stress components and for the spring rates. The main and most important result was that the calculated bending stress due to deflection could be considerably reduced.
- The number of fatigue cycles can now be calculated from the same set of fatigue curves which are relevant for the unreinforced bellows and for the toroidal bellows. Fatigue life calculations were greatly enhanced and simplified.
- The calculation of universal type Expansion Joints has been simplified by a modified equation for the axial movement per convolution.
- An acceptable radial gap between equalizing/reinforcing rings and the root of convolution/bellows tangent is introduced to section 6
- The 10th Edition has been modified to include English & Metric units of measure. This includes standard conversions in addition to constants used in calculations.
- Tightness of bellows, bands, and rings due to dissimilar material growth rates is considered.
- Bellows pitch and height tolerances were redefined relative to diameter.
- The distinction of thin versus thick bellows has been added.
- Benchmark table inputs and outputs have been revised, with material class and correction factor.
- Single Bellows Axial Vibration Constants were revised.
- Definitions in the Nomenclature section 1.3 have been clarified.

 

 

種類別の販売価格、在庫状況を見る
在庫区分
数  量

カゴに入れる

この商品に対するお客様の声

 

 

mitsumori

見積書をお送り致します

 

 

  新刊案内など配信中!!

 

このページのTOPへ