カゴの中を見る

商品数:0点

合計:0円

カゴの中を見る

商品を探す

商品カテゴリから選ぶ

商品名を入力

検索結果で出ない商品は

お問い合わせ下さいませ

商品カテゴリ

分野別

商品コード: SAE-ARP5583

SAE ARP5583 Revision A: (R) Guide to Certification

販売価格(税込10%): 16,959 円
種類別の販売価格、在庫状況を見る
在庫区分
数  量

カゴに入れる

商品おすすめポイント

書名

SAE ARP5583 Revision A: (R) Guide to Certification of Aircraft in a High-Intensity Radiated Field (HIRF) Environment
出版社/発行元 SAE International (SAE)
発行年/月 2010年6月   
装丁 ペーパー
ページ数/巻数 130 ページ
発送予定 海外倉庫よりお取り寄せ 1-2週間以内に発送します

  

※PDF版(シングルユーザー版)をご希望のお客様は別途お問合せ下さいませ
※当ウェブ・ショップに掲載のない規格につきましては、別途お問合せ下さいませ。
※掲載の規格は、当ウェブ・ショップに掲載時点で確認できた最新版でございます。
最新の発行状況につきましては受注時に改めて確認をさせて頂きますので予めご了承下さい。

  

Description

 

This guide provides detailed information, guidance, and methods related to the Federal Aviation Administration (FAA) Advisory Circular (AC) 20-158 and European Aviation Safety Agency (EASA) draft Advisory Material Joint (AMJ), both titled "The Certification of Aircraft Electrical and Electronic Systems for Operation in the High-Intensity Radiated Fields (HIRF) Environment". The AC provides acceptable means, but not the only means, of compliance with Title 14, Code of Federal Regulations (14 CFR) 23.1308, 25.1317, 27.1317, and 29.1317, High-Intensity Radiated Fields (HIRF) protection for Aircraft Electrical and Electronic Systems, and applicable FAA HIRF Special Conditions to prevent hazards to aircraft electrical and electronic systems due to HIRF produced by external transmitters. It is also intended for this guide to provide the same information, guidance, and methods to the European Aviation Safety Agency (EASA) interim HIRF policies certification requirements.

This guide is neither mandatory nor regulatory in nature and does not constitute a regulation or legal interpretation of the regulation. The information in this guide represents a collection of best engineering practices that have been used to certify aircraft HIRF protection. An applicant may elect to establish an alternative method of compliance that is acceptable to the cognizant airworthiness authorities.

This document is consistent with the guidance in FAA AC 20-158. The AC 20-158 and draft HIRF AMJ may be referenced in aircraft certification requirements such as JAA/EASA certification review items. While this document is generally consistent with AC 20-158 and draft HIRF AMJ, users of this document should verify that the guidance in this document is acceptable to the cognizant airworthiness authorities.

Purpose

This document provides technical guidance to demonstrate compliance with aircraft High-Intensity Radiated Field (HIRF) regulations. This guide may be applied to new aircraft, modification of existing aircraft, and installation of existing systems on an aircraft that has not previously used that equipment. The HIRF regulations apply to aircraft electrical and electronic systems, including power distribution systems, electrical generating systems, electronic engine control systems, electronic flight control systems, and navigation, communication, and flight reference systems. The term 'systems' refers to electrical and electronic equipment; interconnecting power, signal, and control wiring; indicators; control panels; sensors; and software.

The HIRF regulations apply to systems installed on transport airplanes, normal and transport category rotorcraft, and small airplanes. A certification applicant must demonstrate that aircraft systems that perform functions whose failure could prevent continued safe flight and landing are not adversely affected when the aircraft is exposed to the HIRF Environment I, II or III, as specified in the regulations. Additionally, systems performing functions related to the ability of the flight crew and aircraft to operate in adverse operating conditions must not be adversely affected during and after exposure to equipment test levels specified in the regulations. The approach to achieving HIRF certification is through appropriate system protection, qualification, and installation.

Aircraft operate in a number of electromagnetic environments. This document, however, only addresses HIRF. For other electromagnetic environments, reference the appropriate regulations, requirements, standards, and guides.

To avoid confusion with other electromagnetic environments and to provide a means of readily identifying the engineering associated with these regulations, the term 'high intensity radiated fields' will be used along with the abbreviation HIRF in this document.
 

 

 

種類別の販売価格、在庫状況を見る
在庫区分
数  量

カゴに入れる

この商品に対するお客様の声

 

 

mitsumori

見積書をお送り致します

 

 

  新刊案内など配信中!!

 

このページのTOPへ