カゴの中を見る

商品数:0点

合計:0円

カゴの中を見る

商品を探す

商品カテゴリから選ぶ

商品名を入力

検索結果で出ない商品は

お問い合わせ下さいませ

商品カテゴリ

分野別

商品コード: UL1973-2018

UL 1973, 2nd Edition, 2018

販売価格(税込10%): 96,444 円
種類別の販売価格、在庫状況を見る
在庫区分
数  量

カゴに入れる

商品おすすめポイント

書名

UL 1973, 2nd Edition, 2018: UL Standard for Safety Batteries for Use in Stationary, Vehicle Auxiliary Power and Light Electric Rail (LER) Applications
出版社/発行元 UL
発行年/月 2018年2月   
装丁 ペーパー
ページ数/巻数 107 ページ
発送予定 海外倉庫よりお取り寄せ 2週間以内に発送します

 

※当ウェブ・ショップに掲載のない規格につきましては、別途お問合せ下さいませ。
※掲載の規格は、当ウェブ・ショップに掲載時点で確認できた最新版でございます。
最新の発行状況につきましては受注時に改めて確認をさせて頂きますので予めご了承下さい。

  

Description

 

These requirements cover battery systems as defined by this standard for use as energy storage for stationary applications such as for PV, wind turbine storage or for UPS, etc. applications. These systems shall be installed in accordance with NFPA 70, C22.1, or other applicable installation codes.

These requirements also cover battery systems as defined by this standard for use in light electric rail (LER) applications and stationary rail applications such as rail substations. These systems are intended for installation within either the rail car or within a sheltered stationary location such as a rail substation. These battery systems may utilize regenerative braking from the trains as a source of energy for recharging and are intended for direct or indirect connection to the rail power lines. These battery systems are intended for balancing loads during peak hours, serving as an energy storage device during regenerative breaking of the trains, and as a source of emergency power to move trains to the nearest station during power outages.

Appendix B of this standard includes requirements specific to sodium-beta type technologies. Appendix C of this standard includes requirements specific to flowing electrolyte technologies.

This standard evaluates the battery system’s ability to safely withstand simulated abuse conditions. This standard evaluates the system based upon the manufacturer’s specified charge and discharge parameters.

This standard does not evaluate the performance (i.e. capacity measurements under various discharge conditions) or reliability (i.e. capacity measurements under various environmental conditions) of these devices.

Figure 1.1 is a boundary diagram example for a battery system for this application. Figure 1.2 is a boundary diagram example for a module for this application.

 

 

種類別の販売価格、在庫状況を見る
在庫区分
数  量

カゴに入れる

この商品に対するお客様の声

 

 

mitsumori

見積書をお送り致します

 

 

  新刊案内など配信中!!

 

このページのTOPへ